Remodel Kitchen » bathroom

Shower Head Height

Ken — Sat, 05 Apr 2008 05:15:02 +0000

If you are remodeling a bathroom, your contractor may ask you how high you want your shower head. The first time I heard that question, I thought there must be a standard height, right? But, everything being “custom,” I had to come up with an answer.

Of course, the height of the persons that will be using the shower is one factor. Another factor is the type of shower head. A fixed shower head sprays at one angle and height. A hand-held shower head sprays at a different angle and height. If you do not account for that difference and mount the hand-held shower head at the same height as a fixed shower head, your hand-held shower head just might spray the water over your head.

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Occupant Sensors: Bathroom Timers

Ken — Fri, 04 Apr 2008 08:27:00 +0000

If the occupant sensors you are using are not good at sensing occupants, then treat them as a timer. Behind the faceplate, the occupant sensor I am using has a dial that adjusts the shut-off time. Basically, the light will shut off a certain number of minutes after it last senses someone moving around. After I adjusted the shut-off time from 8 minutes to 15 minutes, no one gets left in the dark anymore.

Sure, this basically fixes my occupant sensor problem, but I still hate them. Before, I will tell people to turn off the light when they leave a room and there would be no problem. Now, I am told that I shouldn’t worry because the light turns itself off. There you have it. Title 24 training people not to turn off the lights.

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Occupant Sensors: Good in Theory

Ken — Mon, 24 Mar 2008 05:42:27 +0000

Title 24 is absolutely the bane of homeowners. I’ve griped about Title 24 before. After a year of using occupant sensors in bathrooms, I’m ready to proclaim them a complete failure. When guests come over and stay the night, I have to train them on how to use the bathroom lights, as in if you only turn on the light controlled by the occupant sensor, it may turn off on you and leave you completely in the dark. So, everyone now turns on all the lights just in case. Not sure how this saves energy.

I’ve had the lights turn off on me when I was hidden from the sensor, to the side of the sensor, and directly in front of the sensor. Fortunately, in each instance, I had all the lights on. Install an occupant sensor in the bathroom and it will train you to turn on all the lights and use more energy than you would have otherwise used. The occupant sensor simply cannot detect someone taking a shower. It is completely useless in the bathroom.

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.