So, for two years, I’ve been searching for a solution to the LG front-loading washing machine vibration and noise problem. Last Thursday night, I discovered the Front Load Toad website which promised a solution to the vibration problem caused by front load washers. The clincher was their video which showed a vibration meter measuring the vibration from a LG front load washing machine with GVI pads, with no pads and with Kellet vibration pads. When I saw the video of the LG washing machine with no pads, it looked and sounded much too familiar. With visual proof that the pads worked, I immediately ordered a set of 4 GVI pads. Of course, not before shopping around. Anyways, Good Vibrations (GVI) sells the vibration dampener pads directly, but the prices from Front Load Toad were more competitive. Anyways, they shipped really quickly and I received the pads on Saturday afternoon, just in time for the weekend laundry.

How to Install the GVI Pads

The first problem was trying to figure out how to install the GVI Anti-Vibration Pads. After numerous attempts, I found out a solution. If you are installing the GVI pads, you probably have the washing machine installed indoors in a laundry room. I had minimal clearance on either side of the machine so there was no way I could tilt the washer and place the pad underneath a rear foot. What worked was a broomstick and a flashlight. First, I used the broomstick to push the pad next to the leg. Next, I tilted the washing machine to one side and had an assistant nudge the pad into place under a rear leg. I was able to easily place the pad underneath the front leg by myself. After one side was done, I repeated the process on the other side. Then, I used a flashlight to confirm that the pads underneath the rear legs were properly place.

The first load I ran after I had installed the GVI pads was amazing. I had to open the laundry room door several times just to confirm that the washing machine was actually running. The pads completely eliminated the noise and seriously reduced the vibration. They were amazingly effective.

I’ve been tolerating my LG Front-Loading Washing Machine WM2487HWM for about two years now. Considering the premium price of the washer, I expected my experience to be flawless. Unfortunately, it was not. Out of the box, the LG washer had a defective load balancer which made the washer move all over the laundry room even when it was leveled. The replacement part was back-ordered, so LG left me without the use of a washer for about 3 weeks. I’ve never had a problem with the top-loading Maytag washer I had previously owned.

Even after the load balancer was replaced, the washer still had a vibration problem during the spin cycle. Too bad I can’t find my printout of the washing machine ratings from Consumer Reports at the time of my purchase. I want to see whether I can blame my buyer’s remorse on CR. In their current ratings, CR gives numerous LG washers fair and poor ratings for vibration. Specifically, CR notes:

Vibration was poor, a great concern only if you’ll place the washer on a standard wood-framed floor rather than in a basement.

Well, I certainly wasn’t aware of that when I bought the washing machine. Basically, CR recommends that the LG washing machine be installed in the basement or the garage where it will sit on a poured concrete floor.

LG wants me to believe that “Life’s Good.” Me? I’m not a good marketer. I would say “Life’s Good for one year from the date of purchase.” Not as sexy a message and a tad bit long-winded, but it does carry more of a truth in advertising ring to it. So, I’m 419 days out from the date of purchase and I notice a puddle of water under the LG Tromm SteamWasher (WM2487HWM). Is life good? No. Not even close.

So, I schedule a service call. For the second time. The last time a repair person came to visit the LG washing machine, life was good since the warranty covered the labor and parts. After replacing the load balancer, the washing machine stopped jumping around the laundry room. Cool, but I was without the use of a laundry machine for three or so weeks until the part came in. This time, the repair person identified a leak in the steam unit. So, 54 days after the one year warranty expired, I have to pay the repair person $125.00 to fix a leak. Life’s Not So Good. This LG front-loading washing machine better save me a lot of water and energy to offset that $125 repair bill.